Skip to main content
Skip to main content
Mobility Aftermarket Middle East
0 683 708 001

EPS 708 – Common-Rail Pump test bench

EPS 708

EPS 708

EPS 708 Detail

EPS 708 Detail

EPS 708
EPS 708 Detail

The EPS 708 diesel test bench for common-rail pumps enables diesel specialists to carry out highly accurate testing of components. A test bench with built-in cooling system 0 683 708 020 is available as an option, thus increasing efficiency.

Advanced electronics deliver precision at every level: Injection quantities are measured electronically for cost-effective testing, electronic regulation is at work throughout the various test stages and intelligent self-diagnosis prompts technicians on filter change. This test bench is designed for excellent performance – and designed to last.

More Information

  • The following pumps can be tested: CP1, CP1H, CP3.2, CP3.3, CP3.4 CP4.1, CP4.2, CP4N, CB18, as well as CR-pumps from competitors Denso, Delphi VDO/Continental. Therefor additional accessories are necessary.
  • Rail designed for pressures up to 2,500 bar: Be prepared and extend current testing pressure level (2,200 bar) with add-on kit as diesel technology develops in the future
  • Engine shutdown feature: Safety first! Opening hood immediately cuts engine to protect users
  • Electronic monitoring of service level intervals: Keep the test bench operating at its most efficient level
  • Optional integrated cooling system: An effective way to use less water
  • Built-in database: Itest values for efficient workflows
  • Intuitive interface: Straightforward for technicians to learn and use with confidence
  • Clear and accurate results: Demonstrate your expertise and service level to customers with a printed test report (printer optional)
  • 200 V and 400 V options available: Choice to suit your workshop set-up
Degree of protection IP 43
Degree of protection
Input frequency
IP 43
50 Hz/60 Hz
Degree of protection
Output
IP 43
8 KW
Degree of protection
Number of phases
IP 43
3 P/PE
Degree of protection
Standstill torque (motor)
IP 43
23 Nm
Degree of protection
Maximum torque (motor)
IP 43
61 Nm
Degree of protection
Speed range
IP 43
0 to 4000 min-1
Degree of protection
Customer-provided in-series fuse
IP 43
40 A
Degree of protection
Maximum permissible ambient temperature
IP 43
40 °C
Degree of protection
Axis height (clamping bed height to injection pump axis center)
IP 43
110 mm
Zero-backlash multi-plate clutch according to 2600 ISO Nm/°
Zero-backlash multi-plate clutch according to
Rail designed for pressures up to
2600 ISO Nm/°
250 Mpa
Zero-backlash multi-plate clutch according to
Test pressure
2600 ISO Nm/°
18 to 220 Mpa
Zero-backlash multi-plate clutch according to
Pre-supply-pump pressure
2600 ISO Nm/°
10 to 500 kPa
Zero-backlash multi-plate clutch according to
Lubricating oil pressure (special accessories)
2600 ISO Nm/°
100 to 600 kPa
Zero-backlash multi-plate clutch according to
Test oil
2600 ISO Nm/°
approx. 55 l
Zero-backlash multi-plate clutch according to
Retaining capacity for contaminated oil
2600 ISO Nm/°
approx. 10 l
Zero-backlash multi-plate clutch according to
Lubrication oil (special accessories)
2600 ISO Nm/°
approx. 8 l
Zero-backlash multi-plate clutch according to
Dimensions (W x H x D)
2600 ISO Nm/°
2100 x 1850 x 790 mm
Zero-backlash multi-plate clutch according to
Weight
2600 ISO Nm/°
900 kg

  • Test bench EPS 708
  • CRS 845 H
  • 19“ TFT monitor
  • PC with CD/DVD drive
  • Mouse
  • Mains connection lead
  • Hydraulic hoses
  • Software package
  • Protective cover
  • manual
  • EPS 708 without cooling (400 V):
    Part number: 0 683 708 001
  • EPS 708 with integrated cooling (400 V):
    Part number: 0 683 708 020
Retrofit kit CP4 for EPS 708
1 687 010 390
CB18 pump test kit for EPS 708
1 687 010 402
Set of accessories CP1 and CP3.x (Bosch)
1 687 010 346
Lubricating oil supply (required for CP3.4 pumps)
1 687 001 931
High-pressure hose (1000 mm long)
1 687 016 064
Accessory Set for Denso, Delphi and
Siemens Common Rail Pumps
1 687 010 183
Drive coupling (for CB18 and third-party pumps)
1 686 401 026
Non-Bosch injector supplementary
equipment set (solenoid valve/piezo)
1 687 846 016
High-pressure hose (750 mm)
1 687 016 070
Test pressure lines 250Mpa (6x)
1 687 016 065
Mounting brackets for VE, VR, VP, CP
1 688 010 129
Adapter cable while testing 2 CRIN
1 684 463 711
Connection device return
for NKW Common Rail injectors (CRIN)
1 687 016 080
Injection chamber set (6pcs.)
1 685 438 631
Printer
1 687 001 850
Segment Brochure (PDF)
> Download
Manuals, updates and information
> Learn more

Further products

Test benches and tools

Test benches and tools
Product overview

Learn more
DCI 200

DCI 200
– Single Common-Rail Injector test bench

Learn more
DCI 700

DCI 700
– Common-Rail Injector test bench

Learn more