KTS 980 - Complete wireless solution with professional measuring technology: DCU 220 + KTS 590

0 684 400 922

The sophisticated KTS 980 package (KTS 590 & DCU 220) gives workshops enhanced ability to efficiently meet the challenges of today’s increasingly complex vehicles.

With KTS 590’s in-built 2-channel multimeter and 2-channel oscilloscope, technicians can view real-time electrical signal variation for easier and highly precise testing of complex electrics. And controlling the diagnostic process with the 11.6-inch DCU 220 laptop/tablet PC device gives much-needed flexibility around the workshop and all-round robust performance.

Features and Benefits
Technical Data
Scope of Delivery
Special Accessories
Downloads

Features and Benefits KTS 590

Most advanced ECU diagnosis for Ethernet-based (DoIP – Diagnostics over Internet Protocol) vehicle interfaces: Significantly enhance your workshop’s output, now and in the future
Optimally designed for ESI[tronic] 2.0 software (purchased separately): Enjoy intelligent diagnosis, troubleshooting and support for rapid repair and maintenance
Fully PassThru compliant: Access and reprogram vehicle manufacturer control unit software for efficient daily workshop routine
Parallel diagnosis: Module communicates with up to three CAN and K-Line interfaces simultaneously for fast and highly productive diagnosis
Supports Bosch Easy Connect and other Bosch vehicle-specific adapters: Easily extend diagnostic capabilities with choice of vehicle-manufacturer-specific non-OBD cables available
100 m-range Bluetooth connectivity: Ultimate convenience – increase your workshop coverage and increase your productivity

Features and Benefits DCU 220

Super-fast, latest-generation Intel Core i5 processor: Connects to ESI[tronic] 2.0 Online startup in just 30 seconds
Simple switching between laptop and tablet mode: You choose keyboard or tablet for most practical data entry
2 x 24Wh hot-swappable lithium-ion batteries: Keep powered and keep working with just one battery while you replace the other. No need to stop the test
Works with any KTS module: Flexibility to enhance workshop efficiencies

Technical Data DCU 220

Processor

Intel Core i5-6200U, 2.3GHz (Boost: 2.8GHz)

RAM

8 GB DDR4, expandable to 16 GB

Storage

256 GB SSD

Display

11.6”, sunlight readable
(800 Nits), 1366 x 768 Pixel

Touchscreen

Capacitive multi-touch with dual mode

Battery

2 x 24W, hot-swappable

Wireless

WLAN IEEE 802.11ac and Bluetooth 4.0 class 1 (high performance)

Interfaces

2 x USB 3.0, 1 x USB 2.0
Gigabit LAN RJ45
HDMI
Docking
Audio in/out

Webcam

HD camera, front

Operating System

Windows 10 Professional 64 Bit

Housing

Magnesium alloy, sealed ports

Sealing

IP65

Drop

Military standard
MIL-STD-810G

Weight

2 kg

Technical Data KTS 590

KTS 590

2-channel multimeter & 2-channel oscilloscope

Connections to PC

USB 2.0, Bluetooth® Class 1

Weight

approx. 0.5 kg

Operating voltage

8 V DC to 28 V DC

Power consumption via vehicle battery or power supply

< 10 Watt

Dust and water protection

IP53

Multimeter bandwidth

100 kHz

Oscilloscope sampling rate

20 MS/s

Vehicle protocols

ISO 15031, ISO 22900,
SAE J2534-1 and -2
(PassThru), ISO 9141-2
(K and L), SAE J1850
VPW and PWM,
CAN High Speed ISO 11898,
ISO 15765-4 (OBD),
CAN Single Wire, CAN
Low Speed, ISO 13400
(Diagnostics over IP),
and other vehicle-specific
protocols

Dimensions (W x H x D)

125 x 44 x 180 mm

Operating temperature

5 °C to 40 °C

Scope of delivery KTS 590

KTS 590 unit
OBD connection cable (1.5 m)
Power supply unit
Test lead/probe set
Measuring lead (red / black) only KTS 590
Tapping clamp black
Test tip red
USB connecting cable (3 m)
Mounting kit
Trolley mounting parts set
Bluetooth® USB adaptor
Operating manual
Storage case

Scope of delivery DCU 220

DCU 220 Convertible-PC with carrying handle
Storage batteries (2x)
External DVD drive mit USB connecting cable
Power supply unit (19V/3.4A)
Power supply cable
Stylus with string
Case
Operating instructions DCU 220


BMW 20-pin	1 684 463 631
Daewoo/GM/Holden 12-pin	1 684 463 632
Fiat-Group 3-pin	1 684 463 613
Honda 3/5-pin	1 684 463 634
Hyundai/Mitsubishi 12-pin	1 684 463 638
KIA 20-pin	1 684 463 636
Mazda 25-pin	1 684 463 637
Nissan 14-pin	1 684 463 639
OBD-Adapter PKW-NKW 24/12V	1 684 463 650
Renault PkW 12-pin	1 684 465 582
Toyota “Avensis” without pin 1 and 9	1 684 463 686
Toyota 17-pin	1 684 463 642
Toyota 23-pin	1 684 463 643
VW/ Audi 2pin	1 684 463 611
Suzuki 6-pin	1 684 463 641
Mercedes Benz 14-pin (Sprinter, Atego)	1 684 463 594
SD-Adapter Set 1 in case (BMW, Citroën, Peugoet, Fiat, Lancia, Alfa, Renault)	1 687 011 517
SD-Adapter Set 2 in case (BMW, Citroën, Peugoet, Fiat, Lancia, Alfa, Toyota, VW, Audi, MB)	1 687 011 516
Connection line OBD cable to Uni 4 for vehicle-specific adapters with banana sockets	1 684 463 539
USB Bluetooth Extension 1.8m for Bluetooth USB Adapter	1 684 465 564
USB Bluetooth Extension 3.0m for Bluetooth USB Adapter	1 684 465 565
Bracket for Bluetooth USB adapter	1 681 312 005
Test cable set	1 687 011 208
OBD adapter box with OBD plug and additional OBD socket	1 684 462 514
AC / DC current tongs 100/600 A with banana plug	1 687 224 864
Battery charger station for 2 batteries for DCU 220 (battery not included)	1 68 7335 046
Spare battery, Li-ion battery 11.1 V/24 Wh, with charge level display	1 687 335 047
Trolley (without printer flap or rear cover plates) Note: When mounting on 1 688 003 246, the mounting kit 1 681 038 396 and the docking station 1 687 023 744 are required	1 688 003 246
Docking station new with 3xUSB2.0, 1xUSB3.0, VGA, HDMI, LAN, Audio, RS232	1 687 023 823
Mounting kit with mechanical holder for mobile trolley 1 688 003 246	1 681 038 396
Adapter for power supply via cigarette lighter in vehicle	1 684 465 686
Monitor retrofit kit for trolley	1 687 001 987
RAM retrofit 8 GB to 16 GB	1 688 400 611